Jetting Rotax Max Kart for Android

11 things about Jetting Rotax Max Kart

1. Besides this jetting information, the air density, density altitude, relative air density, SAE - dyno correction factor, station pressure, SAE - relative horsepower, oxygen pressure and volumetric content of oxygen are shown too.

2. • Engine: You can configure in this screen the information about the engine, that is, engine model (Micro Max, Mini Max, Junior Max, Senior, Max DD2), needle type, float type and height, venturi (8.5 or 12.5), idle jet, idle emulsifier, fuel type, oil mix ratio and type of the track.

3. This app can obtain automatically the position and altitude to get the temperature, pressure and humidity from the nearest weather station thought internet.

4. These data are calculated depending on the weather conditions and the engine and track configuration given in the next tabs.

5. Also this tab allows to use the GPS to get the current position and altitude, and connect to an external service to get the weather conditions of the nearest weather station.

6. If you change the weather, or engine setup, or fine tuning, the new setup will be saved in history.

7. This tab lets do a fine tuning adjustment for all values for each jetting setup to adapt to the concrete engine.

8. Application can run without GPS, WiFi and internet, in this case user has to enter weather data manually.

9. • Possibility of use automatic weather data or a portable weather station.

10. • Weather: In this tab, you can set the values for current temperature, pressure, altitude and humidity.

11. For Rotax Max EVO Engine please try our other app: Jetting Rotax Max Evo Kart.