Jetting Modena KZ1 / KZ2 Kart for Android
- REQUIRES ANDROID | Published by Jet Lab, LLC on 2021-11-01 | Category: Sports
Rating 4.875
from 8 Votes |
$ $14.99
- REQUIRES ANDROID | Published by Jet Lab, LLC on 2021-11-01 | Category: Sports
Jetting Modena KZ1 / KZ2 Kart is a Sports app by Jet Lab, LLC. This app provides, using temperature, altitude, humidity, atmospheric pressure and a given engine configuration (engine model, floats, carb bore, emulsion tube type, floats, oil ratio, fuel type), 12 !!! jetting recommendations for Modena KK1, KK1R, MKZ, KK2 engines that have DellOrto VHSH 30 carbs. This app can obtain automatically the position and altitude to get the temperature, pressure and humidity from the nearest weath.
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
APK (Android Package Kit) files are the raw files of an Android app. Learn how to install jetting-modena-kz1-kz2-kart.apk file on your phone in 4 Simple Steps:
Yes. We provide some of the safest Apk download mirrors for getting the Jetting Modena KZ1 / KZ2 Kart apk.
1. This app provides, using temperature, altitude, humidity, atmospheric pressure and a given engine configuration (engine model, floats, carb bore, emulsion tube type, floats, oil ratio, fuel type), 12 !!! jetting recommendations for Modena KK1, KK1R, MKZ, KK2 engines that have DellOrto VHSH 30 carbs.
2. For each jetting setup, the following values are given: main jet, emulsion tube, needle type and needle position, idle emulsifier (inner pilot jet) and idle jet (outer pilot jet), throttle valve, air screw position.
3. • Engine: You can configure in this screen the information about the engine, that is, engine model (KK1, KK1R, MKZ, KK2), carburetor diameter, emulsion tube type, float type and height, fuel type, oil mix ratio and type of the circuit.
4. Besides this jetting information, the air density, density altitude, relative air density, SAE - dyno correction factor, station pressure, SAE - relative horsepower, oxygen pressure and volumetric content of oxygen are shown too.
5. This app can obtain automatically the position and altitude to get the temperature, pressure and humidity from the nearest weather station thought internet.
6. Also this tab allows to use the GPS to get the current position and altitude, and connect to an external service (you can choose one weather data source from several possible) to get the weather conditions of the nearest weather station.
7. These data are calculated depending on the weather conditions and the engine and track configuration given in the next tabs.
8. • Weather: In this tab, you can set the values for current temperature, pressure, altitude and humidity.
9. • let you use different measure units: ºC y ºF for temperatures, meter and feet for altitude, liters, ml, gallons, oz for fuel, and mb, hPa, mmHg, inHg atm for pressures.
10. This tab lets do a fine tuning adjustment for all this values for each jetting setup to adapt to the concrete engine.
11. Application can run without GPS, WiFi and internet, in this case user has to enter weather data manually.
Apk Mirror 1: : Download APK
I work as mechanic and this app saves for me a lot lot lot of time to setup carbs :)
5***** App very accurate on track, its not just a guide!
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
