RIGID: Conduit Bending Calculator is a Productivity app by Bret Hardman. RIGIDpro is an advanced bending calculator that was specifically made for helping with Mechanical, Electrical, and Hydraulic Benders. A true respectable side kick to any electrician working with conduit of any type and size.
APK (Android Package Kit) files are the raw files of an Android app. Learn how to install rigid-conduit-bending-calculator.apk file on your phone in 4 Simple Steps:
Yes. We provide some of the safest Apk download mirrors for getting the RIGID: Conduit Bending Calculator apk.
1. With additional features that allow you to change the conduit size and type; Mark to Center, which deciphers between placing marks at the tip of the hook or the center of the bend; Measure To Center, which will align all bends to the center of conduits, ideal for running raceways with various sizes of conduit.
2. Mark Conduit: Have a complicated bend? Say a 25” stub, a Three Bend Saddle that needs to be centered 35” from the Back of that 90 at a 22.5 degree interval and needs to clear a 4” conduit, with another 90 66 ½” inches away from the back of the previous 90, and it needs to be cut 25” from the back of that 90.
3. With a simple click and drag you can change the Centerline Radius (this information can usually be found on the bender’s shoe) or the Take-Up of the specific shoe size being used.
4. Whether you need to swiftly obtain information about the bender you’re using, or a multiplier card without scrounging through your wallet, or a calculator with the capability of working with fractions (x/16”) and decimals simultaneously, or a bender calculator that accounts for gain and shrink.
5. Bends supported are 90 Bends, Offsets, Three Bend Saddle, Four Bend Saddle, Kick with 90 Bends, Kicks, Segmented 90 (3 – 49 shots), and Cut Conduit.
6. All Benders are programmed with the Centerline Radius and Take-Up of the shoe that are based on their factory settings found within their manuals (accuracy may vary slightly).
7. There is the ability to go and edit specific bend measurements; if you wanted the first 25” 90 stub to be 27” without changing the distance afterwards.
8. RIGIDpro is an advanced bending calculator that was specifically made for helping with Mechanical, Electrical, and Hydraulic Benders.
9. Quickly discover additional information about the specified bender’s shoe such as the Gain, Setback, Travel and Radius Adjustment.
10. Select from several different types of bender styles whether it’s a Mechanical, Electrical, or Hydraulic Bender.
11. A true respectable side kick to any electrician working with conduit of any type and size.
Apk Mirror 1: : Download APK
I bought it thinking it would apply to the hand bender I use, can’t figure out how to ask to return it for a refund. Probably good for the right user.
I have used this app extensively for 5 years. It works very good except for one drawback. When you calculate an offset or 4 point saddle where you need to get the rise up before the obstacle this app gives the wrong starting point for the first mark. If you use the start it gives you will hit the obstacle. I find that if I shift the starting point about 4 inches sooner and move all the marks towards the starting point the same amount I can obtain my rise before the obstacle and if it’s a saddle I come off the obstacle right away instead of going 4 inches past it before starting that bend. The data page is very helpful with gain, setback, take up and travel. All around very useful.
Missing benders
No common bender everyone uses, confusing to navigate. Worthless and just used to make the app creator money. Lick my dong.
Muy buena app
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|