Jetting for GasGas 2T Moto for Android

11 things about Jetting for GasGas 2T Moto

1. Also this tab allows to use the GPS to get the current position and altitude, and connect to an external service (you can choose one weather data source from several possible) to get the weather conditions of the nearest weather station (temperature, pressure and humidity).

2. This app is using temperature, altitude, humidity, atmospheric pressure and your engine configuration for calculate optimal jetting (carburetor config) and spark plug to use for GasGas 2-strokes Enduro, Motocross moto bikes.

3. This app can obtain automatically the position and altitude to get the temperature, pressure and humidity from the nearest weather station thought internet.

4. Besides this jetting information, the air density, density altitude, relative air density, SAE - dyno correction factor, station pressure, SAE- relative horsepower, volumetric content of oxygen, oxygen pressure are shown too.

5. These data are calculated depending on the weather conditions and the engine configuration given in the next tabs.

6. If you change the weather, or engine setup, or fine tuning, the new setup will be saved in history.

7. • Engine: You can configure in this screen the information about the engine, that is, engine model, year, spark manufacturer, fuel type, oil mix ratio.

8. • Weather: In this tab, you can set the values for current temperature, pressure, altitude and humidity.

9. • Results: In this tab main jet, needle type, needle position, pilot jet, air screw position, throttle valve, spark plug are shown.

10. App can run without GPS, WiFi and internet, in this case user has to give the weather data manually.

11. This tab lets do a fine tuning adjustment for all this values to adapt to the concrete engine.