Jetting for KTM 2T Dirt Bikes apk

Jetting for KTM 2T Dirt Bikes cho Android


- REQUIRES ANDROID | Danh mục: Sports

Xếp hạng 0 từ 0 Bình chọn | $ 89.000đ



Jetting for KTM 2T Dirt Bikes Ảnh chụp màn hình

→ → → →


Tải xuống và cài đặt APK trên Android


Cách thiết lập Jetting for KTM 2T Dirt Bikes APK:

Tệp APK (Bộ gói Android) là tệp thô của ứng dụng Android. Tìm hiểu cách cài đặt jetting-for-ktm-2t-dirt-bikes.apk tệp trên điện thoại của bạn trong 4 bước đơn giản:

  1. Tải jetting-for-ktm-2t-dirt-bikes.apk xuống thiết bị của bạn bằng bất kỳ máy nhân bản tải xuống nào của chúng tôi.
  2. Cho phép các ứng dụng của Bên thứ 3 (không phải cửa hàng Play) trên thiết bị của bạn: Đi tới Trình đơn » Cài đặt » Bảo mật » . Nhấp vào "Nguồn không xác định" . Bạn sẽ được nhắc cho phép trình duyệt hoặc trình quản lý tệp của mình cài đặt các APK.
  3. Tìm tệp jetting-for-ktm-2t-dirt-bikes.apk và nhấp để Cài đặt: Đọc tất cả lời nhắc trên màn hình và nhấp vào "Có" hoặc "Không" tương ứng.
  4. Sau khi cài đặt, ứng dụng Jetting for KTM 2T Dirt Bikes sẽ xuất hiện trên màn hình chính của thiết bị của bạn.

Jetting for KTM 2T Dirt Bikes APK có an toàn không?

Đúng. Chúng tôi cung cấp một số bản sao tải xuống Apk an toàn nhất để nhận Jetting for KTM 2T Dirt Bikes apk.



Jetting for KTM 2T Dirt Bikes v1.12 APK Tải về Gương



Có gì mới trong v1.12


  • Ngày phát hành: 2023-08-17
  • Phiên bản hiện tại: 1.12
  • Kích thước tệp: 4.03 MB
  • Nhà phát triển: ISEnet
  • Khả năng tương thích: Yêu cầu iOS 12.1 hoặc mới hơn. hoặc Android KitKat 4.4, Lollipop 5.0, Marshmallow 6.0, Nougat 7.0, Oreo 8.0, Pie 9.0, Quince Tart 10, Red velvet cake 11, Snow cone 12 hoặc sau đó phiên bản

This app provides, using temperature, altitude, humidity, atmospheric pressure and oil-mix ratio, a recommendation about the jetting configuration to use for KTM 2-strokes MX and enduro bikes (SX, SXS, EXC, XC and MXC models). In order to get the weather values, the application can use the location service (GPS or WiFi) to obtain the position and altitude, and the network connection to get the temperature, pressure and humidity from the nearest weather station. Nevertheless, the application can run without GPS, WiFi and internet connection, in this case, the user has to give the weather data. The application is made up of four tabs that are described next: - Results: in this tab, the recommended main jet, needle type and clip position, pilot jet and air screw position are shown (screw position is expressed in turns from fully tightened). These data are calculated depending on the weather conditions and the engine configuration introduced in the next tabs. Under the recommended main jet, the calculated real value with decimals is shown. The air density and density altitude are shown too. In addition, this tab lets do a fine tuning adjustment to adapt to a concrete engine (you know that each engine has its own personality). - Weather: you can set the values for current temperature, pressure, altitude and humidity. The values of this screen can be manually set or can be loaded by the application reading the data from the nearest weather station (from the GPS tab). - Engine: you can set in this screen the information about the engine, that is, the model year, model and carburetor, and the oil mix ratio that you\'re using. - GPS: This tab allows to use the location service (using GPS or WiFi) to get the current position and altitude, and connect to an external service to get the weather conditions of the nearest weather station (temperature, pressure and humidity). The app let you use different measure units: ºC y ºF for temperatures, meter and feet for altitude, and mb, hPa, mmHg, inHg y atm for pressures. Valid for the following models from 2005 to 2024: - 50 SX: 2005-2024. - 50 SX Factory Edition: 2021-2024. - 50 SX Mini: 2017-2024. - 65 SX: 2017-2024. - 85 SX: 2005-2024. - 105 SX: 2006-2012. - 125 SX: 2005-2022. - 125 SXS: 2005-2007. - 125 EXC: 2005-2016. - 125 XC: 2017-2018. - 144 SX: 2007-2008. - 150 SX: 2009-2022. - 150 XC: 2010, 2012, 2013, 2014, 2017, 2018, 2019. - 200 EXC: 2005-2016. - 200 XC: 2005-2012. - 250 SX: 2005-2022. - 250 SXS: 2005-2007. - 250 XC: 2007-2019. - 250 EXC: 2005-2018. - 300 EXC: 2005-2018. - 300 XC: 2009-2018. - 300 MXC: 2005. * Please note that the application is valid only for engines that use carburetor. Not valid for fue injection engines.


Apk Mirror 1: : Tải về APK



Jetting các ứng dụng như Jetting for KTM 2T Dirt Bikes




Các apks khác bằng ISEnet