XR-3 Remote para Android

11 detalles sobre XR-3 Remote

1. The XR-3 meter's screen is mirrored on your mobile device, allowing you to identify the satellite, toggle to different satellites and transponders and measure RF level, demodulated signal quality, and LNB LO drift.

2. Climb the ladder with your phone on an armband, run the XR-3 Remote app, and check signal level and quality and re-align your satellite dish without having to first remove the LNBF head and temporarily connect short coax jumper cables from the LNBF to your satellite meter.

3. The iOS mobile device connects to the XR-3 satellite meter using WiFi technology without using any 4G data and without going through the internet.

4. 5) WiFi range of iOS mobile device to XR-3 satellite meter varies depending on obstacles and terrain, but is approximately 100 to 300 feet.

5. Use the XR-3 Remote companion app to remotely monitor and control Applied Instruments' WiFi enabled XR-3 Modular Test Instrument when paired with a compatible iPhone or iPad.

6. 3) Only the XR-3's main Run screen, AZ/EL screens, and limit scan screens are viewable and controllable via the mobile device.

7. Application example: Connect your XR-3 satellite meter at the ground block location and power on the XR-3.

8. 2) XR-3 Remote app only works with the XR-3's satellite meter modules.

9. To confirm the hardware version of your XR-3, press MENU, select Versions from the Main Menu and refer to the Base HW Version field.

10. 1) Only works with XR-3 hardware version 3.01 (XR-3's with optional WiFi hardware module installed).

11. Then pair your XR-3 to your iOS mobile device via WiFi.