valveMate for Android

11 things about valveMate

1. valveMate® indicates when flow is choked or flashing, where the degree of flashing is given by the steam mass fraction shown in the results.

2. The characteristic valve factors FL (liquid pressure recovery factor) and xT (pressure differential ratio factor) can be entered individually, or picked from a list of numerous trim types as given by the standards mentioned above (cf.

3. In the settings, you can select between mass or volume flow rate, specify the maximum flow velocities for water and steam separately.

4. HORA's valveMate® is the ultimate tool for sizing control valves for water and steam.

5. The necessary thermodynamic properties of the fluid are calculated using the formulations of the International Association for the Properties of Water and Steam (IAPWS-IF97).

6. When changing a unit, the affected parameter will maintain its true physical value, thus valveMate® serves as a unit converter as well.

7. Based upon the input data, valveMate® automatically detects the aggregate state of the fluid and applies the respective formulae.

8. valveMate®'s intuitive user interface with the simple input-output approach lets you get straight to the results.

9. You can toggle between metric or imperial units, or select your favourite unit for each parameter individually.

10. Thanks to the automatic e-mail generation you can send the calculation results to anyone in the world.

11. valveMate® is sensitive to the selected language of the iPhone/iPod.