Jetting for World Formula Kart for Android

11 things about Jetting for World Formula Kart

1. This app provides, using temperature, altitude, humidity, atmospheric pressure and your engine configuration, a recommendation about optimal carburetor configuration (JETTING) and spark plug to use for karts with Briggs & Stratton World Formula karting engines, which use a Walbro PZ 26 carburetor.

2. Also this tab allows to use the GPS to get the current position and altitude, and connect to an external service (you can choose one weather data source from several possible) to get the weather conditions of the nearest weather station (temperature, pressure and humidity).

3. This app can obtain automatically the position and altitude to get the temperature, pressure and humidity from the nearest weather station thought internet.

4. Besides this jetting information, the air density, density altitude, relative air density, SAE - dyno correction factor, station pressure, SAE- relative horsepower, volumetric content of oxygen, oxygen pressure are shown too.

5. • Results: In this tab main jet, needle type, needle position, pilot jet, mixture screw position, spark plug, spark plug gap, float height are shown.

6. These data are calculated depending on the weather conditions and the engine configuration given in the next tabs.

7. • Engine: You can configure in this screen the information about the engine, that is, engine model, year, spark manufacturer, fuel type, oil mix ratio.

8. • Weather: In this tab, you can set the values for current temperature, pressure, altitude and humidity.

9. Application can run without GPS, WiFi and internet, in this case user has to enter weather data manually.

10. In addition, this application can work with a pressure sensor built into the iPhone.

11. This tab lets do a fine tuning adjustment for all this values to adapt to the concrete engine.