SDR Receiver for Android

11 things about SDR Receiver

1. SDR Receiver processes signals that are streamed over the network from a host computer (Mac, PC or Raspberry Pi) that is attached by USB bus to an RTL-SDR, Airspy HF+ or SDRplay radio.

2. An rtl_tcp server or equivalent application running on the host computer receives baseband IQ data from the radio and streams the sampled signals over the network to the iPhone or iPad running SDR Receiver.

3. Requires an RTL-SDR, Airspy HF+ or SDRplay radio and a host computer which are not provided with the application.

4. The appropriate server application must be installed on the host computer and configured for the attached radio.

5. Demodulate and play AM and FM signals received by an RTL-SDR, Airspy HF+ or SDRplay radio.

6. Requires a radio and a host computer which are not provided with SDR Receiver and must be separately installed and configured.

7. SDR Receiver is a Software Defined Radio (SDR) that processes, demodulates and plays AM, narrowband FM and wideband FM signals.

8. Support for 192 ksps and 384 ksps Airspy HF+ sampling rates requires Airspy HF+ firmware version R3.0.7 or later, and hfp_tcp version v.1.2.117 or later.

9. Streams data from an rtl_tcp, hfp_tcp or rsp_tcp server application which are free and open source applications.

10. • Selectable 8-bit or 16-bit sample size streaming from Airspy HF+ and SDRplay radios.

11. • Custom URLs enable another application on the same device to set the station and start streaming.