Haaze - Stereo Tool for Android

11 things about Haaze - Stereo Tool

1. Haaze is using two different stereo widening techniques, Haas (short delays between left and right channel) and ”Split EQ” (different gain on different channels on different frequency regions).

2. By splitting the input signal into 16 different frequency regions, spanning from 20 Hz to 20kHz, Haaze can add different amount of stereo-widening to different frequency regions.

3. Haaze provides two different ways of making a mono (or a not-wide-enough-stereo) signal to a wider stereo signal.

4. This makes it possible to transform a mono track into a natural sounding stereo track (by for example keeping lower frequencies in mono while spreading the higher ones).

5. To apply the ”Split EQ” effect, drag the LOW (bass frequencies), MID (mid frequencies), HIGH (high frequencies) sliders to apply the effect.

6. The top-most part applies the effect on higher frequencies, and the bottom-most part applies the effect on lower frequencies.

7. NOTE: When setting the MIX knob somewhere in the middle, there might be noticeable phase issues (if so, we recommend setting the value to max and adjusting the other parameters instead).

8. We recommend using Haaze with AUv3 compatible hosts.

9. To apply the Haas effect, click and drag the spring component horizontally.

10. Important: Haaze in stand-alone mode does not support IAA, Audiobus.

11. You can try it out using the microphone, but beware of audio feedback (use headphones!).